To save energy it?s popular to build houses with low energy loss. In these houses the walls are keeping a lower temperature in the external side which leads to a higher relative humidity. In addition more material, such as wood studs, are used which means that there is more moisture to dry. More moisture in combination with higher relative humidity may pose a higher risk of microbial growth.

To save energy it?s popular to build houses with low energy loss. In these houses the walls are keeping a lower temperature in the external side which leads to a higher relative humidity. In addition more material, such as wood studs, are used which means that there is more moisture to dry. More moisture in combination with higher relative humidity may pose a higher risk of microbial growth.

Energy price are on the way up to a high level that will not diminish in the future make us to focus more on the sustainable development for a better solution of residential houses. Passive house or low energy housing are one of the solution to make residential more environment friendly, in same time it´s a financial security using less energy, and saving money. The last 10 years in Germany and all around Europe the concept of passive house been developed, and people aim to know more about these concept that leading the market more attractive for passive houses. A passive house is a well designed building highly insulated and air tight with mechanical ventilated system for the whole building envelope that minimizes the use of energy for heating [1].The housing company Mimer has chosen to invest in low energy consumption in every new housing project.  These future plan projects are decided to use less than 75 kwh per square meter annually in purchased energy [2].This thesis is about new constructed passive houses, and focuses on the evaluations of the temperature, and moisture condition for attic, external walls and joist.

In our thesis we will compare interior walls, both bearing and non-bearing. All of thewalls analyzed are currently used in production by Skanska Construction, who is alsoour employer/supervisor for the project. The different wall types will be comparedfocusing mainly on time, cost and workability. All of these walls aside from the nonbearingwall are constructed using concrete, either prefabricated or cast on site..

In this work a study has been performed to show the different kinds of insulated balcony connections exists on the market. In the work there is also a short description of thermal bridges concerning balconies. A description of older solutions for balcony connections is given as well as a calculation of the difference in energy costs for a insulated balcony connection compared to the standard connection. The work includes a short description of the different products. After that there is a short information about their insulation properties, durability, acoustic performance, assembly, computer programme and a short analyses for each product..

This report discusses the constructionof different types of exterior wallconstructions and analyses wall layers.Standard wall constructions from theSwedish building contractors NCC andSkanska and also from the materialproducer Isover have been chosen for theresearch. Life cycle cost analysis hasbeen made to conclude the mostprofitable wall type, seen from asustainable and economic perspective.The calculations have been made for aperiod of 50 years.The report shows that building with wellinsulated walls is a more profitablesolution both economically and whatconcerns sustainability even though thehigher investment. However, when wallssimilar insulation properties are beingcompared, the study proves that lowerinvestment cost is more profitable.The report introduces requiredconstruction techniques of walls inorder that the reader should understandwall constructions with different layersand properties. The essay shows theimportance of properly constructed wallsto avoid air leakage and moisturedamage.The essay has been implemented byliterature studies, contacts with NCCand Skanska and by energy calculationsmade by hand and using the software VIPEnergy..

This is a booklet with information and inspiration about precast retaining walls. The three chapters contain information about concrete as a material, how the surface of the wall can be altered, and a chapter with ideas for a new precast wall. I have obtained information through books, interviews, lectures and fairs. The retaining walls on the market do not correspond to the requirements of the Landscape Architects I have interviewed. I have therefore considered their opinions in the chapter containing my new ideas for new retaining walls.

Moisture damage in buildings is a serious issue that leads to problematic consequences and high economic costs. Despite the knowledge and awareness existing about moisture problems, extensive damager still occurs today. Studies of moisture in the exterior wall constructions shows that the issue if often caused by rain and water intrusion. These kinds of problem result in major costs usually because the companies have to replace the material and structural components and also in some cases tear down large parts of the buildings.The work includes moisture theory and descriptions of four different exterior wall constructions, wood stud wall with plastered facade, exterior wall with wood facade, exterior wall with concrete, and exterior wall with brick facade. Our thesis work describes how the constructions are affected and moisture damage due to water intrusion.

Pigs in Swedish organic production systems have been shown to have more findings of arthritis at slaughter, compared to pigs in conventional pig production. With this in mind a study was performed, to primary, investigate variation in exterior, gait and weight gain between sire breeds and, secondly, to investigate variation between herds, season, gender, age and assessment occasion on these recordings. Swedish commercial hybrids, crosses between Norwegian Landrace and Swedish Yorkshire were inseminated with either Hampshire or Duroc as terminal sire. All the pigs had known pedigree as each semen dose contained sperms from one individual boar. All piglets were individually tagged closely after birth, and exterior and gait assessment were performed at two separate occasions, early and late during the fattening period.

The purpose of this master thesis is to describe the professional and literary life of Karl-Gunnar Wall, city librarian of Katrineholm between 1944 and 1975. Questions at issue are the reasons for Walls literary interests, Walls choice of occupation, crucial personal meetings, the context in which Wall acts, Walls fundamental principles as a librarian and as a critic, and the features comprising Walls life history. The method used is a merely qualitative one called "life history". It is founded on in-depth interviews with the persons involved and emanates from the individuals own story about his life. I have carried out three taped interviews; one with Wall himself, and two with his colleagues.

Background: The most energy efficient houses today are so called passive houses. These houses achieve high energy-efficiency partly by having well insulated walls. U-value describes the amount of heat transfered through a building element, the more insulation, the smaller U-value. A typical passive house wall have a U-value of 0.10 W/m2,°C. The passive houses are primarily made as small family houses and not as a block of apartments.

Passive houses are a relatively new concept in Sweden and by that it is meant a house without a traditional heating system. The most acknowledged passive house project is the terrace houses in Lindås, Gothenburg, which we have used as a reference. This project concerns a square apartment block. So far, no square apartment block has been built as a passive house in Sweden.The common opinion in the construction industry is that it is not economical to build extremely energy efficient houses. With Peab as commissioner our task was to investigate if that is true, if regarding the construction of a multi storey house as a passive houseMidroc, now owned by Peab, constructed in the block of Preussen in Jönköping during 2004-2005 four houses, with 132 apartments distributed on seven floors.

In Sweden, selection for leanness in pigs has been going on for almost a century. This sometimes results in gilts and sows being too lean and consequently in a risk for reduced reproduction and health status. The Swedish recommendation includes that gilts should be mated after seven months of age, after one documented oestrus, at 120-140kg live weight and with a backfat thickness of 16-20mm. Five gilt producing herds were visited and records of age, heart girth (for weight estimation), body condition (visual estimation), backfat thickness and exterior were made. The same records were also taken in four gilt buying herds on newly purchased gilts.

AbstractClimate and environmental issues are of paramount importance. Researchers agreethat we must all contribute to a reduction of gases that contribute to climatechange. Energy consumption must decrease within all sectors and the promotionof renewable sources of energy must be introduced.Each sector should aspire to decrease its energy consumption. Energyconsumption is strongly linked to waste gases that contribute to climate change.Passive houses are a part of the construction industry's methods to attain energyconservation.Passive houses are derived from low energy houses and super insulated houses. Apassive house is intended to obtain heat from the inhabitants and through theiractivities.

Construction companies are frequently criticized for high prices and long construction time. At the same time, statistics shows that construction workers are on the sick-list for occupational injuries or casualties more than other groups at the labour market.Skanska built a block of flats with tenant-ownerships in Gävle. The construction consists of concrete walls with in-fill walls in the front. The purpose with this degree project is to perform a risk analysis in work environment with focus on repetitive strain injuries and control the time report for in-fill walls manufactured in a field factory. The result of this project will help to make more realistic cost predictions in the future.This degree project has been performed in cooperation with the construction company Skanska.